The unit is easy to set up and get working. Some caveats: on reboots or firmware updates, the order of the AMS units (if you have more than one) may change and you have to manually confirm the filaments on the front panel. The AMS is also very unforgiving of less pliable filaments and they can break off at the convergence point of the AMS where they exit. This is a difficult place to troubleshoot as there are small springs and magnets with specific orientations that need to be kept, plus rubber runners that can be lost easily. Again, it's great when it works, however the trouble spots should be more modular as filament breaks will happen.
The unit is easy to set up and get working. Some caveats: on reboots or firmware updates, the order of the AMS units (if you have more than one) may change and you have to manually confirm the filaments on the front panel. The AMS is also very unforgiving of less pliable filaments and they can break off at the convergence point of the AMS where they exit. This is a difficult place to troubleshoot as there are small springs and magnets with specific orientations that need to be kept, plus rubber runners that can be lost easily. Again, it's great when it works, however the trouble spots should be more modular as filament breaks will happen.
