Home » AMS Hubs
A gray Bambu Lab AMS Hub, a device used to connect multiple AMS units to a printer, laying on a flat surface.
White electronic device with ports on a white background
A gray Bambu Lab AMS Hub, a device used to connect multiple AMS units to a printer, laying on a flat surface.
White electronic device with ports on a white background
Bambu Part

AMS Hubs

Backorder
SKU: D-BLP-AMSH
€45,33
Print technology

Use this text to encourage communication or promote sharing on social networks.

You can also add links

AMS Hub - A1 Series Overview

This HUB accessory is specifically designed for A1-series 3D printers, serving as a standardized hub for seamless connectivity and integrated functionality between the AMS, AMS 2 Pro, and AMS HT.

Installation

Please learn about the installation on Bambu Lab Wiki.

In the Box

-AMS HUB*1
-4 Pin Cable*1
-PTFE Tube (about 600mm)*1
-PTFE Tube (about 520mm)*1

Compatibility

A1 Series

AMS Hub Overview

The AMS Hub is used to expand the number of AMS connected to Bambu X1/P1 series printers from 1 AMS unit (4 channels) to a maximum of 4 AMS units (16 channels) to improve the refueling speed across your multiple AMS units and support the redundancy of a buffered signal.

Installation  

  • Install the AMS Hub on the back of the printer, replacing the Filament buffer if you have one, and use the matching Bambu 4 Pin cable to connect to the printer, use the Bambu 6 Pin cable to connect to the first AMS, then continue to use the 6-pin cable to connect the remaining AMS in series.

  • Use the matching PTFE Tube to connect the AMS Hub and the air tube connector on the back of the printer, the tube should pass between the 4-pin plug and the spool holder to reduce the resistance.

  • According to the placement of the AMS and the printer, you can choose the appropriate length of the PTFE tube to connect the AMS and the AMS Hub. The tube should be as short as possible and avoid winding to reduce the feeding resistance.